 |
|
| Your basket |
|
|
|
|
| Customer Login |
| Partners |
 |
 |
 |
 |
 |
 |
Home -
Wheel nuts, bolts, locks
 |
We supply a vast range of wheel accessories, locking nuts, locking bolts, centre rings, nuts, bolts, studs and general accessories to suit a wide range of wheels and fitments.
 It is essential that you select the correct sized nut or bolt for your application. Type: Nut or Bolt Seat: Taper, Radius or Flat. Note that a special washer may also feature. In some cases there is a shank where the nut or bolt has an extended section after the seated section. Thread: Diameter and pitch ie M12x1.5 equates to 12mm diameter and 1.5mm thread pitch. This is vehicle specific and must be checked. Length: Length of the shaft which includes the total length of both threaded and blank on the shaft. Hex: 17, 19 or 21mm diameter head for wheel brace spanner. Head diameter: New tuner wheels have a narrow hole for the bolt or nut. For this application we recommend the Star Slim, Micro Locks, Spline drive and Tuner locks. Misc.: Note any other specifics such as open or closed ended nut, shank and washers etc. Remember: The fitting of after market wheels can require a different style of nut or bolt in terms of seat, shaft length and sometimes a narrow head depending on the type of wheel. Click into the thread guide section for more details on how to determine your nut/bolt/stud specificationelick whebolts locking nuts |
|
| Featured in Wheel nuts, bolts, locks | |||||||||
|
|
|
|
|
|||||
|
|
|
|
|
|||||
|
|||||||||
