Classic lamps by PIAA Lighting. Traditional looks with the latest lighting technology from PIAA. PIAA lamps are available for various applications. Note the diagram adjacent which is a guide on the 3 types of beams available. Fog - A fog light enhances visibility in fog, rain, snow and dust. Fog lights are intended to be used conjunction with standard headlamp systems. PIAA's Ion Crystal series of lighting are an excellent choice for bad driving conditions. Fog lights are intended to be used in conjunction with standard headlamp low beams. Drive - A drive light is intended to supplement the high beam of a standard headlamp system to enhance the illumination for increased visibility all round. Spot - Sometimes referred to as a Pencil Beam. A narrow beam of light that has an extremely long range with minimal side to side illumination. Some of PIAA's key use of technology in various lighting systems (depending on the application) includes Ion Crystal - PIAA's method of achieving this is a propriety coating applied to a bulb or lens that transforms the light output to amber with much higher efficiency that conventional amber coloured lenses. Lens Fluting - A process in which moulds the lens to control the beam pattern by deflecting the light to the desired point in the beam. Lens Fluting usually looks like vertical cuts in the lens. Multi Surface Reflector - MSR, A reflector designed to control the beam pattern with a computer designed surface to project the light precisely to the desired point in the beam. Dichroic - A technology where the lamp design is such that it allows heat to dissipate away from the bulb which in turn increases bulb life and makes the whole lighting setup more efficient. Used mostly in the compact tuning lamps in the PIAA range. Note that the Impreza Classic and Lancer Evo 4, 5 lights are featured in the 80 XT & PRO - H3 section as link below. The Subaru Impreza WR1 lights are featured in the 600 - 610 SMR section below. Evo 6 lights are featured in the 600 -610 SMR & 530 -540 - 550 section.

speedLINK to a product PIAA Self adhesive lens protectors (pair) - 540 / 600 PIAA Self adhesive lens protectors (pair) - 80 PRO XT PIAA Self adhesive lens protectors (pair) - 800 HID / 80 RACING

Featured in Classic lamps
40 - 60XT	80 XT & PRO - H3	80 Series - H4	510 - 520	540 - 550
555 SMR - 580	600 - 610 SMR

PIAA Self adhesive lens protectors (pair) - 540 / 600 12cm diameter pre cut, race tested to 160MPH, extremely durable and impact resistant stock code: 99601-12 £16.24 £19.08 inc vat	PIAA Self adhesive lens protectors (pair) - 80 PRO XT 6inch diameter clear, race tested to 160MPH, impact resistant. Fitment includes Evo 4, 5, Impreza Classic bumper lamps. stock code: 99830 £16.24 £19.08 inc vat
PIAA Self adhesive lens protectors (pair) - 800 HID / 80 RACING 6 3/4 inch diameter pre cut, race tested to 160MPH, extremely durable and impact resistant stock code: 99800 £16.24 £19.08 inc vat